Toyota FJ Cruiser Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
46 Posts
Discussion Starter #1
So i just got a valentine one. I want to hardwire it. It comes with the harness with the fuse and all, I just want to know what cable i should splice it to for power, it says I should do it to a cable that has power as soon as the car is turned on. any specific cable you guys could recomend as well as its location? preferably easy to get to.
 

·
Premium Member
Joined
·
8,285 Posts
The easiest way is to get your power from the main cabin fuse block (under the driver's side of the dash), using a tap-a-circuit or similar. This post shows you how/where: http://www.fjcruiserforums.com/forums/163790-post80.html

If you're ever going to wire in more than one accessory, you might as well put in an auxiliary fuse block like a lot of us have done:

http://www.fjcruiserforums.com/forums/how-technical-articles/40862-12v-aux-fuse-block.html

http://www.fjcruiserforums.com/forums/how-technical-articles/52993-12-circuit-switched-fuse-box.html
 
1 - 2 of 2 Posts
Top