Toyota FJ Cruiser Forum banner
  • Hey everyone! Enter your ride HERE to be a part of September's Ride of the Month Challenge!
1 - 4 of 4 Posts

·
Registered
Joined
·
268 Posts
Discussion Starter · #1 ·
Got the All-pro e-locker guard and have a couple of questions:
1. Any tips or precautions re: installation? (it did not have any notes with it)
2. Should I use threadlocker on the supplied bolt or just add a lock washer?
Thanks,
Mike
 

·
Registered
Joined
·
211 Posts
Got the All-pro e-locker guard and have a couple of questions:
1. Any tips or precautions re: installation? (it did not have any notes with it)
2. Should I use threadlocker on the supplied bolt or just add a lock washer?
Thanks,
Mike
The supplied top bolt(1.5") was to long and hit the back of the e-locker housing, so I had to go to Home Depot for a 1" one. I used blue thread lock on both bolts & single nut. Maybe a 15 minute job :)
 

·
Registered
Joined
·
268 Posts
Discussion Starter · #3 ·
Thanks for the info, that's what I needed to know.


The supplied top bolt(1.5") was to long and hit the back of the e-locker housing, so I had to go to Home Depot for a 1" one. I used blue thread lock on both bolts & single nut. Maybe a 15 minute job :)
 

·
Premium Member
Joined
·
17,095 Posts
The supplied top bolt(1.5") was to long and hit the back of the e-locker housing, so I had to go to Home Depot for a 1" one. I used blue thread lock on both bolts & single nut. Maybe a 15 minute job :)
Thanks for info!
 
1 - 4 of 4 Posts
Top