[ckramer10]

Ok here is my problem, I have an OEM grille guard from my old FJ that I want to put on my "new" 07 Titanium FJ but it doesn't have any place for me to bolt it down through the grille. Is there something I am missing or is there I mod I have to install or make to get this thing on, or is it just not gonna happen? Please let me know, thanks to all.

 

[Dissident]

Yeah you have to cut a couple holes in the plastic bumper cover

 

[ckramer10]

thank you

 

[HUGO STIGLITZ]

There is a PDF on the install here somewhere.

 

[Village40]

I put one on my '07 about two months ago.

You should have 4 brackets. 2 have rings and threaded holes. Those go in the bumper cover. The other two brackets are kind of "L" shaped. Those two go on the right and left sides just over the radiator. Four holes need to be drilled into the bumper cover through the plastic. There's a bit of metal underneath. If you feel under the lip of the bumper, near the headlights, you'll know where the holes need to be.

 

[Village40]

I have the Toyota dealers installation instructions (.PDF file). If you'll PM me your email, I'd be happy to send them to you.

 

[ckramer10]

thanks all, village I'll PM you