Toyota FJ Cruiser Forum banner
1 - 2 of 2 Posts

·
Premium Member
Joined
·
6,538 Posts
Is it better to get the hex head for a 1/2 ratchet or use a alan wrench for the front transfer case?
I used a hex head socket on a 1/2" ratchet and it worked great for me. Especially when speed spinning the plugs (on & off) with just the socket (removed from the ratchet).

DEWFPO
 

·
Premium Member
Joined
·
6,538 Posts
Both fill and drain on the front diff are 10mm hex. The rear are both 24mm or 15/16 (recommend 6 point socket only).

DEWFPO
 
1 - 2 of 2 Posts
Top