I am on my second set on my FJ. been very happy with them. I have 50000 miles on the current set on mine they are at 7/32'S (photo Below). the other thing I like is they only weigh 55lbs in a 285/75R-16. with my Konig wheels (18lbs each) they only weigh 73lbs total. if you rotate every 5000-8000 miles and keep the pressure checked I have had good results with them my first set had 70000 miles on them they were at 3/32'S-4/32"s
it is leveled. Front Bilstein 6112'S 3rd notch 600lb springs, SPC UCA'S, Sway bar relocate, Wheeler bump stops no rub with the 285'S so far and I flexed it some so far so good.
Rear stock springs with Bilstein 5160'S, stock bump stops
Not sure yet if we are going to go to the 4th notch and put springs on the rear. it rides really nice the way it is. it is a 6 spd manual and I put a URD short throw shiftier in it it feels like a sports car compared to my 2008 AT
I want to surprise my Hubby for his birthday, so I ordered him a nice vinyl for his Black Diamond. I would like to top it off with a nice set of aftermarket wheels, I found these slick KMC XD140 in RED. Here are the specs.
Bolt Circle: 6x139.70
Size: 17x9 in.
Finish: Gloss Black Machined With...
Hey, i was looking for some 17" trd bronze wheels, anybody know where the best place to find them for the best price?
I may go with the black, but would much prefer the bronze.
Time to ditch the 20's someone put on it before me.
Looking to get some new tires and have them shipped to the boarder. Then just popping down to pick them up to save on shipping. But I would hate to drive down and then not be able fit them inside. Looking at some 285/70/17