Toyota FJ Cruiser Forum banner
1 - 1 of 3 Posts

· Registered
5,694 Posts
first off, can we please ditch the stock enclosure? that would help a ton.

secondly, you wont want to reuse any of the stock wiring for an aftermarket amplifier. it wont have the size to support the current draw of the amplifier. i would go with a wiring kit from any decent manufacturer. stinger is what i prefer.

then you will need a line out converter (high-low converter). some will actually come with a volume control which i recommend. this can be found from manufacturers like peripheral, scosche, metra, and soundgate.
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.