Toyota FJ Cruiser Forum banner
1 - 2 of 14 Posts

· Registered
1,977 Posts
Some had stripped the previous allen bolts on mine so I finally cut the heads off drilled them out re-taped and used a regular bolt, Alot easier to install with a hex bolt than the allen heads.

Also install your driving lights prior to installing the brush guard.
I agreed with above. Trash those allen bolts, and use reg hex bolts.
1 - 2 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.