Toyota FJ Cruiser Forum banner

OME lift installed and i GOT A PROBLEM...

1955 Views 10 Replies 11 Participants Last post by  Two-Socks
I installed the lift yesterday and I think the only problem I have is that the bottom of the spring holders (where they sit in) on the shock in the front is touching the sway bar on both sides.... Any suggestions??
1 - 1 of 11 Posts
I had the exact same problem. The installer put the cups in upside down. Same rubbing on the sway bar that cause a squeak. Also, lowered the front lift by 3/4 inch. The are upside down, dude.
1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.