Toyota FJ Cruiser Forum banner

OME lift installed and i GOT A PROBLEM...

1966 Views 10 Replies 11 Participants Last post by  Two-Socks
I installed the lift yesterday and I think the only problem I have is that the bottom of the spring holders (where they sit in) on the shock in the front is touching the sway bar on both sides.... Any suggestions??
1 - 1 of 11 Posts
You may have installed the Spring Cups in upside down.... The factory set-up has the Spring Cups facing down, but with the OME set-up, they must face upwards with the springs resting inside of them (where they will collect dirt)....
1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.