Toyota FJ Cruiser Forum banner

1 - 12 of 12 Posts

·
Registered
Joined
·
675 Posts
Discussion Starter #1 (Edited)
This is our newest project, It is my personal car, as many of you know I am very much into Supras I figured this was a right car for me.
I will have daily updated pictures of this project everyday, please check back often.
It is a 1993 GS300 with a Supra TT motor from a Japanese Toyota Aristo.
Enjoy the pictures...Project GS300
 

·
Registered
Joined
·
1,824 Posts
That should be quite the sleeper. What kind of hp levels are you looking for? Or is this more of an audio display kind of thing?
 

·
Registered
Joined
·
675 Posts
Discussion Starter #4
That should be quite the sleeper. What kind of hp levels are you looking for? Or is this more of an audio display kind of thing?
Keeping the stock Turbos for now so it wiull be limited to about 400HP At the wheels with basic Performance upgrades.

Higher boost
Exhaust Etc.
 

·
Registered
Joined
·
675 Posts
Discussion Starter #5
Here are some pictures. Many of you will remember the project I had started a thread with it, I still have pictures available at the website, However it is now 99% finished and driveable so here are some sample shoths from the photo shoot.
1993 GS300 with 2JZGTE Supra TT / ARISTO motor swap... Currently T-61 Single Turbo. DYNOED 439 RWHP @ 17.5 psi. Limited with the Stock Jap spec Injectors and the Supra Turbo Auto Tranny. Next up is the injctors and built auto, TC with a bigger Turbo should yield near 650 WHP & Still be a DAILY DRIVEN STREET CAR. The album on the website will show all the process of building this car. System consists of 4 JL amps, 2 X 6.5" C5 6.5" components in custom front doors. C5 6.5" Coax in rear doors. 2 X JL 12w6 Subwoofers in each corner of the trunk. 9" Monitor molded in dash as well as a Kenwood Double Din housed in dash, 2 headrests with 9.2" monitors. 2 17" Monitors in th erear truck lid with a custome moled trunk cover. All heater vents in center are removed and capped to allow more air from the side vents. The seats are upholstered with 2 tone Tan outside and Black suade inside. Dash removed from car and dyed black. Ceiling, trim and rear deck will be black suade. We also decided to do the ceiling in suade. We are very excited about this project. PICTURES ARE FINISHED AND BEFORE PICTURES AS WELL AS IN PROGRESS. Make sure to click on page 2 ... on the bottom of the page. More pages will be added daily. I have decided to mix the pictures up a little to keep it interesting.










Thank you for looking.
 

·
Registered
Joined
·
842 Posts
That thing is sick!!!

Beautiful work on everything, motor, interior, sound, paint looks great, great taste on mixing of interior fabrics and other colors....
 

·
Registered
Joined
·
675 Posts
Discussion Starter #10
Thank you for all the compliments.

Stay tuned for our SC300 project. Almost done.
 

·
Registered
Joined
·
847 Posts
Hot Aristo! I love what you did with the interior. Transfered it from boring to sporty. I also love the Supra wheel in there. Alota character in the interior.

I was gonna drop a 2JZ in my Cressida but that I chickened out :) 7M-GTE > 2JZ ;)

Quick question, what kind of paint you used on the dash? I'll be doing something like this for my project sleeper.
 

·
Registered
Joined
·
675 Posts
Discussion Starter #12
Hot Aristo! I love what you did with the interior. Transfered it from boring to sporty. I also love the Supra wheel in there. Alota character in the interior.

I was gonna drop a 2JZ in my Cressida but that I chickened out :) 7M-GTE > 2JZ ;)

Quick question, what kind of paint you used on the dash? I'll be doing something like this for my project sleeper.
We used a high quality dye we special ordered from a supplier. We applied 3 coats and let it fully dry before th ecoats. It came out real nice.
 
1 - 12 of 12 Posts
Top