Toyota FJ Cruiser Forum banner

Projector headlights

16K views 21 replies 9 participants last post by  jesblanc41 
#1 ·
#2 ·
  • Like
Reactions: meesterover
#3 ·
Nice. Those look almost identical to the LED version at a much better price. Please post a review after you have run them for a while and some pics too.I can go traditioanl bulb over LED as well. I am just not fond of the big amber chunks on the corners (nor am I of the "bumper wings" too).
 
#8 ·
#11 · (Edited)
The headlights on the FJC I just picked up need some restoration, but given the price of these replacements, I would rather just swap them. Also thinking about swapping the front turn signals.

Anyone have any experience with either of these products?

Headlights: https://www.amazon.com/Vplus-Headli...j+cruiser+head,aps,232&sr=8-6#customerReviews

...
According to the comments, the ones in your link don't fit an FJ. :frown

I found these:

https://www.amazon.com/Approved-Hea...&sprefix=fj+cruiser+headlight,aps,219&sr=8-15

The seller says they work on an FJ. I asked the question to see if anyone had tried them. I'm really tempted.

*** Edit: I got a reply to my question on Amazon. Apparently someone tried the lights I linked above and the fit wasn’t right ***

Dan
 
#12 ·
According to the comments, the ones in your link don't fit an FJ. :frown

I found these:

https://www.amazon.com/Approved-Hea...&sprefix=fj+cruiser+headlight,aps,219&sr=8-15

The seller says they work on an FJ. I asked the question to see if anyone had tried them. I'm really tempted.

Dan
I'd like to see how they fit an FJ, considering that these are standard 7" sealed units and FJs don't have a standard 7" carrier...
There is a question from someone asking if they work in an FJC and an answer stating that "they work great in my pickup".
Does anyone know of a 7" adapter/carrier for FJs?
 
#14 ·
Easiest fix is to put a 35w HID kit in there. Don't go anywhere near LEDs - they are brighter, but most of that extra light goes straight into oncoming drivers eyes.

Diode Dynamics is a supporting vendor, and every one of their products is top notch - the only bulbs that I haven't replaced with theirs so far are my headlights (I have another brand HID kit for now).

https://www.fjcruiserforums.com/for...kits-toyota-fj-cruiser-plug-play-install.html

4300K light temp is my preference (and what I run currently).
 
#21 ·
Diode Dynamics is a supporting vendor, and every one of their products is top notch.
Completely agree with this quote. I changed every one of my lights (even license plate lights) to Diode Dynamics 8 months ago and couldn’t be happier.

In about a month, I will be switching to demon eye projector headlights with a halo and getting two amber SS6 put into the lower grill. They will be on left & right of the front license plate. It’s all ordered. I am so excited. Highly suggest @DiodeDynamics
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top