Toyota FJ Cruiser Forum banner
1 - 2 of 13 Posts

· Registered
2,730 Posts
You need a phillips, flat head, and 10mm box wrench,

Two phillip screws on top of grill
Black plastic fasteners on top of grill...pop open with flat head
Gently pull grill forward on both sides

4 phillip screw under bumper cover
4 10mm screws under bumper cover
2 phillip screws on each side of bumper cover at wheel well facing aft
black plastic fasteners on top of bumper cover...pop open with flat head
2 black plastic fasteners holding lower grill insert...pop open with flat head

firmly pull bumper on either side to pop it out...sounds painful be it's what you gotta do.

I've done it twice this month.
1 - 2 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.