Toyota FJ Cruiser Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
118 Posts
Discussion Starter #1
If there is enough demand, we may consider making the rear shocks for the RC 6" lift to compliment the front shocks we currently make.

Let me know if you are interested.

Glenn
 

·
Registered
Joined
·
864 Posts
If there is enough demand, we may consider making the rear shocks for the RC 6" lift to compliment the front shocks we currently make.

Let me know if you are interested.

Glenn
I would be interested in getting all 4 corners....

:cheers:
 

·
Registered
Joined
·
118 Posts
Discussion Starter #3
Radflo now has the rear shocks for the RC 6" lift available to match the front coil overs. Please contact me for details.

Glenn
 

·
Registered
Joined
·
118 Posts
Discussion Starter #7
Might be interested in all fours too. My point of concerns are CV angles and travel in the shocks, keeping them close or better than RC.
Thanks a bunch :clap:
These shocks where designed with the dimensions supplied by Rough Country. You will be able to keep the CV angles the same or slightly better.

Glenn
 

·
Registered
Joined
·
305 Posts
How much do the rear shocks run?
 

·
Registered
Joined
·
321 Posts

·
Registered
Joined
·
305 Posts
i gave them a call and they quoted me $207.00 a piece, with a baby coming though it might be worth it as the rear suspencion is way too stiff
 

·
Premium Member
Joined
·
82 Posts
interested
 
1 - 11 of 11 Posts
Top