Toyota FJ Cruiser Forum banner

Rock lights installed

1510 Views 17 Replies 8 Participants Last post by  FJabbu
8
I shared this with the other fellas in AZ and so I figured I'd show yall. I bought three sets of Wally World twenty dollar lights and a switch.


I just screwed the thing into the rear skid mount.


Under the driver and passenger doors are the same sized holes with threads...again I just screwed them in. Drivers side is between the slider and the frame. Passenger side is between the frame and exhaust pipe.



Then stacked some nuts on the bolts that hold the indicator lights on the ARB.


and affixed a light with a bracket style mount as opposed to a single bolt.


The last light went on the Bandi Mount.



Final Product...
See less See more
1 - 9 of 18 Posts
Cool looking, but I cant hang my head out of the FJ far enough to see much more than a bit of the front tire anyway.
No, but my spotter can and nobody will be shining a flashlight in my face.
Come summertime I do most of my wheelin at night. Unfortunately that is when scorpions and rattlers do most of their hunting as well; being able to see the ground when getting out of the FJ is a bonus for that reason. When working under the FJ I require no flashlight. It's not just neat looking, it's functional.
My suggestion is to use a different type of light pattern for rock lights.

The lights you showed are "driving" lights, which present a very narrow intense light designed for long distance driving. You will get more usable light from a flood light pattern, which disburses intense light in all directions for a short distance - more effective for lighting your immediate surroundings. Unfortunately, it is rare to find low-price flood lights, as it's not as popular for "retail" stores.

One exception is the Hella 4" round, rubber housing flood light - usually available for under $20.00 each...
Yes, thanks for the info. Just like you said, I couldn't find inexpensive flood or fog lights. I figured I could go back and change some stuff later when I found exactly what I want. In the mean time I spent under $70 and when I tried them out in the desert they were quite adequate.
I was not putting the idea down, just my thoughts on it for my own experience. I've not been wheeling at night for years and ground critters are not a big problem in this area.
No worries...
OUTSTANDING cheap way to keep me alive when I'm spotting you......thanks FJabbu....
No problem Homedad...but it's your wife and kids that should thank me. They really seam to like you, for some reason. :jester:
Looks like a great install:rocker:
thanx brother.
Interesting ideas.
The reason for the creative mounting is that I really didn't want to drill any holes, not because I'm opposed to them, but because I always mess things up or change things and I didn't want extra unnecessary holes. So, I put the things in places that would provide function without modification to the vehicle or bumper.
You say you bought the lights and a switch, I hope you put a relay in there somewhere. Did you use multiple switches for different areas or just one switch for all of them?
Ahh, you picked up on that...good job. I used a 40 amp relay that I had sittin around and a 30 amp fuse. The total amperage is 27 for the six lights.
Great install i like the lights. A++
Thanks and I discovered an unintended benefit. Reverse lights at eye level piss tailgaters off.
1 - 9 of 18 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top