Toyota FJ Cruiser Forum banner

Rock lights installed

1507 Views 17 Replies 8 Participants Last post by  FJabbu
I shared this with the other fellas in AZ and so I figured I'd show yall. I bought three sets of Wally World twenty dollar lights and a switch.

I just screwed the thing into the rear skid mount.

Under the driver and passenger doors are the same sized holes with threads...again I just screwed them in. Drivers side is between the slider and the frame. Passenger side is between the frame and exhaust pipe.

Then stacked some nuts on the bolts that hold the indicator lights on the ARB.

and affixed a light with a bracket style mount as opposed to a single bolt.

The last light went on the Bandi Mount.

Final Product...
See less See more
1 - 1 of 18 Posts
You say you bought the lights and a switch, I hope you put a relay in there somewhere. Did you use multiple switches for different areas or just one switch for all of them?
1 - 1 of 18 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.