Toyota FJ Cruiser Forum banner

The "Green box on wheels" 2010 AG 6MT build

108K views 316 replies 63 participants last post by  Ivan70 
#1 · (Edited)
Well, there it is, The Green Box on wheels. After a little over a year of modding, quiet a few mistakes and bad decisions i finally got in the right path... at least i think i did :)

Unfortunately no images of stock model, except crappy one, at night, but you all know how it looks like :lol: I bought very basic model, no hatch, no rails, no alarm.. well, with upgr pckg2.

This is what i have installed so far:

Pro Comp 8089 17x8 wheels
Nitto Terra Grappler tires - Removed
---Aries Nefr Bars - Removed
OEM Trailer hitch
Hella Rallye 1000 Black Magic with OEM switch and harness
VIP RS3200 Security with GB Sensor
TRD knobs
Led Dome lights
Husky Liners front and back.
Aeroflow Headlight Covers.
OEM rock rails
Locking fuel door
Ricochet Front bash plate, engine, transmission, transfer case, cross bar, gas tank skinds.
Secondary high pitch horn.
TRD Quick shifter.
Scuba mod.
TRD Exhaust.
Full CB radio install
Weathertech windows visors
Ricochet wind deflector for OEM rack
Front - Bilstein HD shocks with 3/4" lift Toytec spacers. - Removed
Rear - Bilstein HD shocks with stock TT coils (red :)) - Removed
Black out bumpers and bezel (PlastiDip)
TT Mirrors.
Tundra door handles.
ScanGauge2
TRD air filter Removed
Radflo Front coil-overs
Icon rear shocks
Cornfed - rear spacers Removed
33 x 12.5 x 17 Mikey Thompson radial ATZ`s on stock rims powdercoated
Spydertrax 1.25" spacers
Nitto Terra Grapplers 285/70/17 on Fuel Hostage rims 17x9, 4.5BS -12mm gone
AFe Cold Air Intake
Road Armor Stealth bumper
PIAA 4" Ion fog lights
Warn HID 8" lights
Bushwakers
Safary Snorkel
ToyOutfitters lower rear links
ToyOutfitters rear upper links
All Pro 3.5 rear coils
All Pro Apex sliders
Gusseted spindles
Custom LR Adjustable UCA`s - DAPURAK style :)
Mikey Thompson Classic III wheels, customizes by OMF Performance
35x12 Mikey Thompson Baja MTZ tires
Expedition1 Bumper with swingout
Superwinch TigerShark with synthetic line






As it stands now:



Some images of the progress:

3 days old...


































I will be updating it as i receive parts and install them :)

:cheers:
 
See less See more
18
#76 ·
Re: 2010 AG 6MT - work in progress.

Finished painting rear today :)



Front i did during a week..



Still debating whether to paint middle silver piece or leave it alone. Mirrors and handles should be done next week :)
 
#77 ·
Re: 2010 AG 6MT - work in progress.

Finished painting rear today :)



Front i did during a week..



Still debating whether to paint middle silver piece or leave it alone. Mirrors and handles should be done next week :)
Looks good man. My vote would be yes to painting the middle silver piece. IMO I think it would look SICK!! Get rid of all that gray . . . . :rocker:
 
#79 ·
Re: 2010 AG 6MT - work in progress.

Finalized the black-out today. Big thanks goes to Joeisip811 for installing mirrors and handles like under 40 min! :cheers:

I am still undecided about front bumper middle silver piece :lol: .....

crappy cell phone pic:

 
#82 ·
Re: 2010 AG 6MT - work in progress.

What size tires are you running? 265/70/17. I love the way your FJ looks and want mine with the exact same stance so I'm probably gonna go with the toytec 3/4 spacer too, just wanna make sure we have the same size tire. I'd hate to install the spacer and wonder why my FJ still doesn't look as good as yours!
 
#83 ·
Re: 2010 AG 6MT - work in progress.

What size tires are you running? 265/70/17. I love the way your FJ looks and want mine with the exact same stance so I'm probably gonna go with the toytec 3/4 spacer too, just wanna make sure we have the same size tire. I'd hate to install the spacer and wonder why my FJ still doesn't look as good as yours!
Thanks man, yes those are stock size 265/70/17 Nitto Terra Grapplers and 3/4" lift spacer :cheers:
 
#84 ·
Re: 2010 AG 6MT - work in progress.

Nice. And the toytec spacers fit the 2010s just fine right? For some reason I have a faint memory of 2010s having a slightly different suspension than the preceding years. Did you buy yours directly from toytec?
 
#87 ·
Re: 2010 AG 6MT - work in progress.

Nice. And the toytec spacers fit the 2010s just fine right? For some reason I have a faint memory of 2010s having a slightly different suspension than the preceding years. Did you buy yours directly from toytec?
Yes sir, they go right on the top of coilover. Kit comes with 2 spacers and 6 longer studs. I already had longer studs on the ones i installed (got them from a friend) so i did not need to replace them... for that you will have to take coilover apart and those studs will need to be pressed in. Other then that, it`s pretty easy to do. On the side note, studs on 2010 coilovers did look almost as long as Toytec ones, so you might want to double check it.
If i remember correctly kit was 63 dollars shipped after forum discount. :bigthumb:
 
#85 ·
Re: 2010 AG 6MT - work in progress.

I like the blackout job Ivan ! :bigthumb:
 
#86 ·
Re: 2010 AG 6MT - work in progress.

nice AG... do you have any front shots where i can see both mirrors and the grill bezel?:lol:

if it's not too much trouble i'd like to see it now please :lol:

also close up shot of your front left lug nuts...:cheers:
 
#88 ·
Re: 2010 AG 6MT - work in progress.

Thanks bandi! :cheers:


Joe, you did not get enough of my truck today while you were installing mirrors and handles? :rofl::rofl::rofl: Now you want to see pictures? Lug nuts? :lol:
 
#93 ·
Re: 2010 AG 6MT - work in progress.

NICE ! I need to black out my black diamond now...
 
#100 ·
Re: 2010 AG 6MT - work in progress.

Ivan where do you get the skid plate? is it stainless? how much was it
Those are Ricochet aluminum skids: FJ Cruiser Skid Plate

Contact cnckart on this forum, he will hook you up :bigthumb:
 
#102 ·
Re: 2010 AG 6MT - work in progress.

I am going to have to get you or Joe to show me how to pop my mirrors so I can put LEDs in there at the Easter Run.
Consider it done B! :cheers:
 
#105 ·
Re: 2010 AG 6MT - work in progress.

Love the rig brotha, well done! I'm green with envy with pun intended.

Where can I find that gas cap btw?
My computer is running like crap right now so I can't search at the moment...
Thanks,
 
#106 ·
Re: 2010 AG 6MT - work in progress.

Love the rig brotha, well done! I'm green with envy with pun intended.

Where can I find that gas cap btw?
My computer is running like crap right now so I can't search at the moment...
Thanks,
Thanks! :cheers:

I got gas cap on ebay... i checked, it`s not avail from that seller, sorry :(

I found this one: http://cgi.ebay.com/ebaymotors/07-2...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
It`s 8 dollars more then i paid.

Door: Toyota Fj Cruiser Fuel Door Black With Lock - All Sales 6071KL
 
#107 ·
Re: 2010 AG 6MT - work in progress.

Installed remaining Ricochets... Now cowered from bumper to bumper :) Put them to test at FJNE Turkey run at Raush. But.. didn`t hit or even scrape them hehe.

Some shots from Raush Creek







More to come :)
 
#113 ·
Re: 2010 AG 6MT - work in progress.

Oh yeah, what about the FJ decal for the fuel door?
As a supporting member i received 2 forum decals, so i stole "FJ" part from there :lol:
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top