Toyota FJ Cruiser Forum banner

121 - 140 of 162 Posts

·
4-Corners Moderator
Joined
·
4,850 Posts
Discussion Starter #121

·
4-Corners Moderator
Joined
·
4,850 Posts
Discussion Starter #122
re: The NEW Complete Front Bumper Listing & Comparison Thread

Just added Hefty Fabworks, a company that debuted their new FJ Bumper at FJ Summit X this year. Cool Bumper! Aluminum too!

 

·
4-Corners Moderator
Joined
·
4,850 Posts
Discussion Starter #123 (Edited)
re: The NEW Complete Front Bumper Listing & Comparison Thread

Well Hardline Fab doesn't produce the original Toy Outfitter bumper anymore or anything for FJ Cruisers for that matter. So I post this here for historical purposes. Same to see such a unique bumper fall out off production. Seems like those who had them were very pleased. Hardline seems like the kind of company that would do custom work though, along with a V8 engine swap! haha

Hardline Fabrication Services (Previously The Toy Outfitters)

The Toy Outfitters FJ Cruiser Forums Thread

Availability - No longer produced

Airbag Compatibility - ?

Bull Bar – Available upon request

Construction – 1.5” & 1.25” .188 (3/16) wall DOM Tube, ¼” Steel plate,1.5” X 2” .188 (3/16) wall Square Tube

Finish – Painted black

Light mounts – Yes

Price - ??? - No longer listed on their new website. Contact for information

Shackle mounts - On request

Weight – 91 lbs

Winch fitment – Built to order

Matching Rear Bumper – Yes

 

·
4-Corners Moderator
Joined
·
4,850 Posts
Discussion Starter #124
re: The NEW Complete Front Bumper Listing & Comparison Thread

Adding this here since I was able to contact WOR-GEAR and they no longer produce the FJ bumper like they used to. They do still exist though in Las Vegas, NV and will do custom work, so the bumper is technically still available. Unsure of the current bumper prices since it really depends on what the customer wants.

___________________________________________

WOR-GEAR - Website Currently Not Available - Facebook Page: https://www.facebook.com/worgear

WOR-GEAR FJ Cruiser Forums Thread

Availability - No longer commercially produced but they do local custom work

Airbag Compatibility - ?

Bull Bar - Yes or no

Construction - 1 3/4" x .120 wall main bars; 1 1/2" x.120 wall, supports, and light bar hoop; 3 Piece Skid Plate 1/4" aluminum

Finish - Plain Steel Finish or Powder coated black

Light mounts - Yes; offered with a 2 or 3 tab Light Bar hoop

Price - Tube Bumper NO Hoop -$774.99; Tube Bumper WITH Hoop - $824.99; Tube Bumper with WICKED Brush Guard - $???

Shackle mounts - No

Weight - ?

Winch fitment - No on Normal Tube Bumpers, Yes on Brush Guard Style Bumper

Matching Rear Bumper – No



_________________________________________________________
 

·
Registered
Joined
·
524 Posts
Pelfreybilt announced on their instagram page about a week ago that they will debut a bumper for the FJ at summit this year.
 

Attachments

·
4-Corners Moderator
Joined
·
4,850 Posts
Discussion Starter #126
Pelfreybilt announced on their instagram page about a week ago that they will debut a bumper for the FJ at summit this year.
OOO nice!! I will get to see it in person then! :bigthumb:
 

·
4-Corners Moderator
Joined
·
4,850 Posts
Discussion Starter #127
Just added Pelfreybilt to the comparison! Got to meet them at this last FJ Summit. Wonderful folks, and from the looks of it, great products! Really a pretty good deal for a bumper with some cool design features, especially the integrated LED bar.

 

·
4-Corners Moderator
Joined
·
4,850 Posts
Discussion Starter #129
Just added the new Resz Fab V3 bumper, pretty cool design!
 

Attachments

·
4-Corners Moderator
Joined
·
4,850 Posts
Discussion Starter #133
Do you know if a bash plate will bolt on covering the radiator with this bumper?

Sent from my LG-H910 using Tapatalk
I believe the natural design of the bumper covers the radiator.
 

·
4-Corners Moderator
Joined
·
4,850 Posts
Discussion Starter #135
Hope one day I can make my design onto this list :)
Hey if you decide to put it into production so people can purchase and order your bumper regularly then you could definitely be added to the list!
 

·
4-Corners Moderator
Joined
·
4,850 Posts
Discussion Starter #137
Just found out from Trail-Gear that they no longer produce FJ Cruiser front bumpers. May still find a dealer who has one laying around but no more from Trail Gear will be made.

Posting up the listing here for posterity.

_______________


Trail-Gear

http://www.fjcruiserforums.com/forums/trail-gear-inc/

Availability - Discontinued

Airbag Compatibility - ?

Bull Bar (Stinger/hoops) - Yes or no

Construction - 1.75" x .120" wall, DOM material

Finish - Raw metal

Light mounts - No

Price - Rock Defense Front Bumper - $506.05; Rock Defense Low Profile Front Bumper - $439.90

Shackle mounts - No, but does feature a shackle receiver

Weight - 150 lbs

Winch fitment - the winch plates are drilled for most 5000-9500 model low-profile winches and smaller sized 9.0R winches

Matching Rear Bumper – Yes



____________________________________
 

·
fka BLACK HAWK
Joined
·
2,312 Posts
I almost got that bumper. excluding the US Offroad, OF ALL the Aftermarket bumpers it was the least expensive and very DIY'able as far as different tube configurations using the winch mount as a starting base
 

·
4-Corners Moderator
Joined
·
4,850 Posts
Discussion Starter #139
Well as hard as it is to believe, All Pro is no longer producing their iconic front or rear bumpers! So here is the listing for posterity's sake.

____________________________

All-Pro Offroad
SUPPORTING VENDOR

All-Pro FJ Cruiser Forums Thread

Availability - Not Available

Airbag Compatibility - Yes

Bull Bar - Bolt on Bars (or welded on for one-piece APEX bumpers) with Light Tabs, Different Designs Available

Construction - Heavy-duty 3/16" steel plate mounting structure and 1/8" outer shell; 1.75" x .120 tubing for bars

Finish - Unfinished or 3-stage powder coated ($240)

Light mounts - Yes; 2 tabs on light hoops; 4" light mounts on APEX corner bumper pieces

Price - 3-Piece Winch Mount Front Bumper (unpainted) - $699
- APEX (All-Pro Expedition Series) 1-piece bumper (APEX corners, full hoops, fully welded, unpainted) - $1,179
- APEX Bumper Corner Upgrade for 3-Piece Bumper (has 4" light mounts) - $199
- 1-Piece Bumper Upgrade (Turns your 3-piece bumper into 1-piece) - $100
- Bolt-on Center Hoop - $89
- Bolt-on Large Light Bar Hoop (Includes Headlight Protection Loops) - $259
- APEX Welded-on Center Hoop - $99
- Full Welded-on APEX Hoops (Provides Turn Signal Protection) (APEX & 1-Piece Upgrades Required) - $250

Shackle mounts - Yes

Weight - 94 lbs base bumper

Winch fitment - 9,500 lb max; like Warn 9.5XP winch w/ remote solenoid

Matching Rear Bumper – Yes

 
121 - 140 of 162 Posts
Top