Toyota FJ Cruiser Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
32 Posts
did ya figure anything out? I am having same troubles
 

· Registered
Joined
·
32 Posts
thanks for the quick responses guys, dang this forum is good....

I made a call to Unichip, may just wait till I talk to someone, but looks like I'm gonna have to rig it a bit either way I go...

so, let me get this right...you bent to bracket a smidge that holds the green connector to the right of the ECU? and at that point you mounted the PNP Harness on the right on the ECU where the directions say that you should?

and the unichip cpu you mounted on the bottom of the aluminum piece on right side below the glove box? that aluminum piece has a nice big flat panel on the driver side of it too, seems like a decent spot

thanks alot guys for the help :clap:
 

· Registered
Joined
·
32 Posts
naw lol, I meant the driver's side, or left side (if your in the passenger's seat) of the shiny aluminum thingy under glove box, I'm pretty sure that what ya talking about, looks like a good spot for the cpu.....but what about harness? did you put it on right side of ECU where the directions say to? by just barely bending the other thingy with the green connector?

and lay off Al Gore! He invented the internet!!:lol:
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top