Thats's an interesting way to mount something but I would avoid those clamp style holders. Besides being super bulky and ugly looking, most smartphone type devices have external buttons on the top or side which at best would be rendered inaccessible and at worst would get pressed by the holder.

Edit: Scrolled down and saw the rest of the photos. The clamps are small enough to avoid the side buttons. I still think it's too bulky but if that doesn't bother you it could be a quick and easy way to mount. You may have to be the first to get one and let us know if it falls out.

 

Thats's an interesting way to mount something but I would avoid those clamp style holders. Besides being super bulky and ugly looking, most smartphone type devices have external buttons on the top or side which at best would be rendered inaccessible and at worst would get pressed by the holder.

That is kind of what I was thinking too, however this is not as bulky as I usually see...so I thought I'd check. I also saw this one that could be interesting to find out about.

TETRAX FIXWAY LINE CAR MOUNT HOLDER FOR IPHONE 4G 2G - eBay (item 190484194209 end time Jan-26-11 17:52:52 PST)

You may have to be the first to get one and let us know if it falls out.

Either or!

 

Well, I got this bad boy. So far, I'm liking it. Just put it in use today. It doesn't block much, mostly the CD slot and the screen of the FJammer.

I have a feeling that there will be interference of my phones GPS unit, rendering the function useless but time will tell once I attempt to utilize it. It would be unfortunate a this is one of the reasons for having it there. I need a new phone anyway...

 

Love it. I switched the colors on the FJammer so I could tell which mode I was in, and use the wheel controls, so the screen blockage is not an issue.

So far no GPS interference either!

 

How secure is it in the CD slot? Does it have a lot of play/movement when going over bumps? Just curious.

 

Pix?? I'm always buying different mounts. Currently Im using a modded mount that I took apart. It was one that plugged into the 12v plug, so I removed the screws and took it apart, then screwed it into my center console tray (I'm 2wd, so where the 4x4 gear is). It's pretty handy cus the wiring is close to the aux/12v for charging. Only thing is when my dog bumps it... But it's pretty secured into the plastic w a small bolt under the console

Cheap pic:

 

Pix??

Sorry, haven't figured that part out yet, but I will get some and try from home...

 

Toyota FJ Cruiser - 2007-2012 - ProClip Center Mount*-*ProClip Car Mounts for Mobile Phones, GPS, and Handheld Devices

Not a cheap solution, but it is a clean mount. Basically you buy the mount and then choose the style of holder for your phone. They show three seperate mounts available depending on where you want it. I am switching vehicles (Colorado -> FJ) so I only had to order the mount and move the phone holder to the new mount.

 

This is where my iPhone is going. (this was a test fit for cable routing)

 

I don't have first hand experience with this mount. I have the ram iPhone mount and it is solid. I personally don't dig on the "one mount fits all" solutions. Just 2¢. Let us know if you get it.

 

Yes, I did get it. See posts above regarding my current opinion! I like it...

I maybe switching to an EVO or Atrix phone, so getting an iPhone specific mount wasn't a realistic option at this time.

Sidenote: the new 4g Atrix that AT&T will be selling has a docking mount for vehicles...

 

I'm back in the hunt. This guy after a few weeks just doesn't seem to be what I'm looking for. It seems to have loosened up and is kind of bothering me with it inside the CD slot. I am starting to worry about long term damage, because it doesn't stay tight. Just saying...

 

After searching all over the internet I finally decided on the Proclip mount. On their website you choose the base that fits the FJ then a holder that fits whatever device you want. There are also accessories like a swivel base, double attachment, spacers, etc. It is a little expensive but it is much better quality than the others, requires no gluing or tape or screws and positions the iphone at the perfect position. I have had mine for a year now and it works great.

 

Which type did you choose? I don't want to get one that covers the vents...one of them looks like it might just fit what I need, but I can't tell for sure how it is mounted in.

 

Another Mountek install. Solid. Mostly out of the way. Best I've found so far.

 

Go to proclipsusa and look at those mounts. I have or will have in a few minutes a pic in my garage. It is secure and charges, plays through the bottom. All I have to do it drop it in.

Sent from my AT100 using AutoGuide App

 

Go to proclipsusa and look at those mounts. I have or will have in a few minutes a pic in my garage. It is secure and charges, plays through the bottom. All I have to do it drop it in.

Thanks. The URL for the site is Device Holders and Dashboard Vehicle Mounts*-*ProClip Car Mounts for Mobile Phones, GPS, and Handheld Devices. The other one goes to a sketchy parked domain. This might be exactly what I've been looking for...

 

I've used a proclip in a couple of cars. The Proclip on my FJ is rock solid, and has been in the FJ for virtually all of its 85,000 miles. You can configure it so it's out of the way of the vent and just high enough that it's not far from your field of vision through the windshield.

 

I use the Barnacle. BARNACLE iLoveHandles

It is super simple but works great in the FJ where you have some flat surfaces.

The phone looks like it is just floating in front of you.

Might not work for everyone, but so far it has worked well for me.

Peace,
Ryan

 

I use the Barnacle. BARNACLE iLoveHandles

[snip]

Thanks. Looks good. I find during the winters here with constant freezing and thawing that the suction cup mounts can't handle it. I need one that's attached to the dashboard...

 

Proclip is by far the best. They make a mount for every car make and even though a little pricy it's the last mount you will ever need.


Sent from my Autoguide iPhone app

 

x2.

I'm installing the Pioneer AVIC-X930BT on my son's minivan this weekend and added the ProCLip for his iPhone 4.

 

FYI, I tried the Barnacle and it did not hold very well over time. I ended up getting a Ram Lil' Buddy mount and their universal X-Grip holder. It is attached to the top (flat) dash, just to left of center gauge cluster - held via their adhesive circle things. Worked so well I bought another one to hold my Garmin Nuvi on the left side of the dash.

 

I've been using the Macally cup holder iPhone mount. Fits snug in the cup holder, sturdy, and matches the interior nicely. It is close to the AUX outlet or power plug in, and is at a low level do covert texting at stop lights.

MCUP – Universal - Macally Peripherals

 

I use the TOM TOM mount for my Iphone. I dont think they are made anymore:

But it has worked GREAT!!

 

This may sound ghetto but a silicon skin on my iPhone keeps my phone pinned between the compass and the edge of the dashboard. if I stand it up lengthwise, it stays put unless I'm going over lots of bumps, etc