specs info would sooooo help...

 

THANKS!!
I LIKE THESE BEST

 

Thank you!

WHeels:
Panther EMR 440
17x9" 4.5" backspacing

Tires:
33x12.50R17
Mickey THompson Baja Claws.

 

I agree missmy60!!! What brand/size tire is that?

 

^^ That belongs to OFRD_GRL. Search and ye shall find

 

How about the owner or info of the silver FJ, 12th picture down tire brand, size etc.....

 

OH thank you so much MissFJ. Going to the tire store now!

 

Teflons / Painted Steelies

 

I kinda Like these rims and tires... But I Like Micrad's More...

Bandi - 17"x 8" OEM Black Steel Rims w/ 34x10.5x17 Interco TSL Super Swamper LTB Bias Ply Tires

Micrad - 17"x 8" OEM Black Steel Rims w/ Toyo P295/70/17" Open Country M/T's Radials

 

 

OK Miss FJ, it is the 11th pic down from the top of all these. The Voodoo in the garage, side shot. What wheel and tire combo is that? Thanks in advance for your help!!

 

thats me!

another good shot of the wheels/tires

 

 

real nice. Love that black

 

MY choice was Procomp Rock Crawler, Street Loc series 152

Reason I went with mine was 1. function 2. looks , first and 4most they are 100% steel! also procomps are built for offroad, the outside of the rim has a full tig weld bead out side so very stront at impact point, also on the insode where the tire bead sits is indented like a little channel so the bead can sit in there better.

Its hard to see in the pic but if u haver a chance to see a procomp rock crawler rims u must see how hard core the lip of the rim is, when they were off my truck i was hitting the side with a hammer then on the cement and it felt like a sledge hammer.

 

Real nice. Love the black

 

MY choice was Procomp Rock Crawler, Street Loc series 152

Reason I went with mine was 1. function 2. looks , first and 4most they are 100% steel! also procomps are built for offroad, the outside of the rim has a full tig weld bead out side so very stront at impact point, also on the insode where the tire bead sits is indented like a little channel so the bead can sit in there better.

Its hard to see in the pic but if u haver a chance to see a procomp rock crawler rims u must see how hard core the lip of the rim is, when they were off my truck i was hitting the side with a hammer then on the cement and it felt like a sledge hammer.

I like the rims what size did you go with? did you have to run a spacer?? I am not thrilled about that

 

I went with 16" rims and 1" spacer Im not thrilled either but no isues yet.

 

I agree missmy60!!! What brand/size tire is that?

OK Miss FJ, it is the 11th pic down from the top of all these. The Voodoo in the garage, side shot. What wheel and tire combo is that? Thanks in advance for your help!!

They are these listed below by our own Sweety OFRG_GRL !!!

I have 17"x9" Panther EMR-440 wheels with
33/12.50/R17 Mickey Thompson Baja Claw tires...

* -12mm Offset
* 107.95mm Center Bore
* 4.5 Inch Backspace
* 6 x 139.7mm Bolt Pattern

 

They are these listed below by our own Sweety OFRG_GRL !!!

Thank you!!!!

 

They are these listed below by our own Sweety OFRG_GRL !!!

Thank you missfj :grinbiginvert:

 

D!ck Cepek Mountain Cat Muds

Stock Toyota 17" alloys mounted to **** Cepek Mountain Cat 265x70x17 mud tires.

These are the exact same tires as the Cooper STT as seen on Demello's FJ.
Tires are made in the same modes, and distributed through Les Schwab Tire dealers.

More info here

 

18" TRD's W/ Yoko Geolanders. Not much rock climbing to do in flat Florida!

 

Thank you missfj :grinbiginvert:

Thank You MissFJ... Youre' Sweetheat Too !!! inklove:

 

Sure would like to know the specs on these two rigs!! The first one looks like 18's but not sure. Second looks like 20's.

 

What are the specs on that big silver one up top? It's the 12th one down with the PIAA lights. I'm mainly curious about rim width and offset, and tire size. Also, How big of a tire can you fit on the back of the fj? Would a 35x12.5 fit back there?

 

Does anyone else have pictures of other wheels? I am still looking for the PERFECT set for my new FJ.

 

Would like to see Silver FJ's with Black wheels. Thank you,

 

I would particularly like more info on these wheels. I love the "wide" look of the "deep dish" type wheels. It seems like those aren't as plentiful as they used to be. I would love these in 17 x 10's if they would fit. I will have the donahoe lift and I am planning on trimming the front body mounts.
What do you guys think?

 

I'm with ya, I love the deep dish type wheels. On ebay I saw a set of 33x13.5x18 Mickey Thompsons on 18x10 MT Classic beadlocks (don't know if this would be too much with a 3" lift). I used to run 15x10 MT Classics and 33x12.5 BFG's on my '90 and '96 Bronco's (with stock ride height and trimming the inside of the front bumper). I'd like to do 17x10's with 3" Toytec lift. Please, more info on this rig's tires/wheels. Thanks.

 

Dunlop Grandteks on Toyota 17" alloys

 

Micky Thompsons and TA Mud terrian 285 75 17 on 17 X9's

 

Sick Strength Shot!!

 

Here's mine....except now it has 295 Nittos on...