Haven't done it; but a GREAT idea! :cheers:

 

Great idea, keep us posted.

 

I mainly need to know what is the cable i need to tap into.
There are tons of people that have done this to other vehicles. I read this one guy had multiple switches that had to be in a certain order(up, up, down, up...), had to be pulling the highbeam switch and have the door open in order to start, if any of these were wrong it would blow a fuse and not be allowed to start. I don't want to go that crazy.

Just to install a simple on/off switch in-line with the fuel pump power, then mount it in some strange, hidden, yet easily accessible to me spot. I have already been thinking of spots to mount it.
p.s. im very sneaky.

 

It has been done before my friend. See below.

I'm also working on fabbing up a Plug-n-Play/No-Cut/Returnable-to-Stock version. I'll let you know how it goes. The final parts arrive on Tuesday.

DEWFPO

http://www.fjcruiserforums.com/forums/stereo-electronics/26332-kill-switch-bad-guy-protection.html

http://www.fjcruiserforums.com/forums/newbie-discussions/14825-kill-switch-my-fj-newbie.html

http://www.fjcruiserforums.com/forums/misc-technical-discussion/19849-easy-antitheft.html

http://www.fjcruiserforums.com/forums/engine-performance/7121-kill-switch.html

http://www.fjcruiserforums.com/forums/stereo-electronics/4423-creative-kill-switches.html

 

Very cool... I'd like to do this as well. Especially once I get the doors off!

 

Hm, i had another idea. Is there a way to install a cutoff switch to the starter??? Not in line from the battery to the starter(which is the large wire) but a wire similar in size to the fuel cut off.
That way they can't drive it any where, i.e. not even out of my driveway.

 

You should be able to break the low amp circuit to the starter solenoid.

DEWFPO